🌀 Hose Boom Arm – Keep Your Wires & Hoses Organized and Out of the Way Hose Size:2.5" Dust Collection Hose

🌀 Hose Boom Arm – Keep Your Wires & Hoses Organized and Out of the Way Hose Size:2.5" Dust Collection HoseHose Boom Arm Keep Your Wires & Hoses Organized and Out of the Way When your cable chain is maxed out, a Hose Boom is the perfect solution to manage your dust hose, coolant lines, air tubing, and wiringall without interfering with your CNCs motion. Whether you're running an ATC system, water cooled spindle, or just a bulky dust hose, this boom gives you the support and flexibility you need. Whats Included Three boom arm components: Elbow Mid section

Whether you're dialing in tight tolerances or prepping for multi-bit projects

to/3T33fsr *you will have to cut this

Built by PwnCNC

You can also use the Foreman racks on the Woodworker and Journeyman if your machine is on the Riser Blocks

so is not subject to failure due to vibration or dust

- Four lengths of 1/8" thick 1" aluminum angle:  sold at your local Home Depot or Lowes and https://onlinemetals

Ready to rotate

🔩 ER Collets – ER11

which is very important for when you perform maintenance on your machine as fixed racks would block your access to the oil port on the Y axis in the typical mounting configuration

This allows you to use both at the same time and it keeps your dust hose out of the way

This rotary solution comes preassembled with a closed-loop 2Nm stepper motor

their shorter stance